Login Setup/Auditron Administration
Xerox WorkCentre 7132 User Guide 303
Off
Disables the authentication feature.
Local Machine Access
Enables the authentication feature. User registration can be performed using the touch
screen or the PC application. If authentication is enabled, all corresponding services
need to be authenticated. You can respectively turn off the authentication as required.
Network Access
Performs Auditron administration using user information managed by an external
accounting service on a network. User registration is performed by the external server.
• Check User Details - Specifies whether to check user details. Select [Off (Keep
Logon Records] to allow access without verifying the User ID and Account ID. The
entered information is logged on the machine. Select [On] to verify user information.
Remote Access
Verifies the remote authentication server. User registration can be performed using the
remote authentication server. User information cannot be registered on the machine.
• Guest User - Specifies whether guest users who are not registered with the remote
authentication server can logon.
• Guest Password - Specifies the guest password if guest user access is permitted.
Enter a 4 to 12 character password.
Xerox Standard Accounting
Carries out the auditron authentication based on accounting users registered on the
machine.
Auditron Mode
Displays the [Auditron Mode] screen. Specify whether to perform authentication for
copy, fax, scan, or print services.
NOTE: If you enable any of the services listed, the [User Login] screen is displayed
when you press the <Log In/Out> button on the control panel.
Mailbox Access
Displays the [Mailbox Access] screen. Specify whether to perform authentication when
an attempt is made to print out or retrieve documents stored in mailboxes.
Downloaded From ManualsPrinter.com Manuals
To Next Page
Loading...
Need help?
General
