Replacing Toner Cartridges
Xerox WorkCentre 7132 User Guide 359
Inserting a New Toner Cartridge
1. Remove the new toner cartridge
from its box. Rotate the cartridge
from side to side approximately
10 times to evenly distribute the
toner within the cartridge.
2. Insert the cartridge, aligning the
arrow on the cartridge with the
arrow on the machine, and push
until it locks into position.
3. Close the toner cartridge door.
4. Close the front cover.
NOTE: Press firmly in the top center
when closing the cover. If an error
message appears on the display,
press the cover on the right-hand
side to close the cover completely.
5. When the touch screen indicates another toner should be replaced, repeat the
same procesures referring to Removing an Old Toner Cartridge and Inserting a
New Toner Cartridge.
Downloaded From ManualsPrinter.com Manuals
To Next Page
Loading...
Need help?
General
