Xerox WorkCentre 7132

14 Maintenance
364 Xerox WorkCentre 7132 User Guide
Inserting the New Waste Toner Container
1. Remove the new waste toner
container from its box.
2. Insert the new waste toner
container in the machine and
push until it locks into position.
3. Completely remove the old ROS
cleaner (R4) from the machine.
4. Insert the new ROS cleaner into
the machine.
5. Close the front cover.
NOTE: Press firmly in the top center
when closing the cover. If an error
message appears on the display,
press the cover on the right-hand
side to close the cover completely.
Downloaded From ManualsPrinter.com Manuals