Stapler Faults
Xerox WorkCentre 7132 User Guide 395
5. Pull up the lever on the front of
the staple cartridge.
6. Remove the jammed staples
together with the staple sheet.
NOTE: When removing jammed
staples, also remove the staple
sheet. Do not just break off the bent
staple.
7. Close the lever on the front of
the staple cartridge until you
hear it click into place.
8. Lower the lever to return the
staple cartridge to its original
position until you hear it click
into place.
9. Close the front cover on the
Office Finisher.
NOTE: A message will be displayed
and the machine will not operate if
the staple Office Finisher's front
cover is even slightly open.
If the staples cannot be removed
after carrying out the above
procedures, contact your Xerox Welcome Center.
Downloaded From ManualsPrinter.com Manuals
To Next Page
Loading...
Need help?
General
