Xerox WorkCentre 7132

Stapler Faults
Xerox WorkCentre 7132 User Guide 397
5. Remove the entire staple sheet
including the jammed staple.
NOTE: Be sure to remove the entire
staple sheet. Do not remove the
jammed staple only.
6. Pull down the front lever on the
staple cartridge until it clicks into
place.
7. Return the staple cartridge to its
original position.
8. Close the front cover of the
Integrated Office Finisher.
If the staples cannot be removed after carrying out the above procedures, contact your
Xerox Welcome Center.
Downloaded From ManualsPrinter.com Manuals