Xerox WorkCentre 7132 User Guide

15 Problem Solving
424 Xerox WorkCentre 7132 User Guide
034-528 Unable to perform manual send during dialing. Try executing the same
operation again when not dialing.
034-529 The received document cannot be printed on the paper loaded on the machine.
Try one of the following.
• Check that the correct paper size is loaded in the machine.
• Check that the tray is correctly placed in the machine.
034-530 Operation timed out. Perform the operation within the specified time frame.
034-550 An error occurred while processing to write onto the FaxCard-ROM. Contact the
Xerox Welcome Center.
034-700 The G3 DP (Dial Pulse) connection timed out. Turn the power off and on.
Contact the Xerox Welcome Center if the problem persists.
034-701 The software needs to be reset. Turn the power off and on. Contact the Xerox
Welcome Center if the problem persists.
034-702 Communication failed due to an incorrect telephone or fax number. Check the
number, and perform the same operation again. If a speed dial button was used,
check the correct number is registered appropriately.
034-728 An invalid number was specified. Check the destination number, and perform
the same operation again. Contact the Xerox Welcome Center if the problem
persists.
034-730
034-731
Refer to 034-508.
034-734 An internal error occurred. Turn the power off and on. Contact the Xerox
Welcome Center if the problem persists.
034-796 An invalid data was found in the dialing data. Dial the number again, then
perform the same operation.
034-797 An communication parameter error occurred. Turn the power off and on.
Contact the Xerox Welcome Center if the problem persists.
034-798 A data parameter error occurred. Turn the power off and on. Contact the Xerox
Welcome Center if the problem persists.
034-799 Dialing data is not registered, even though the auto dial feature was specified.
Turn the power off and on. Contact the Xerox Welcome Center if the problem
persists.
035-700 An error occurred using the fax. Perform the same operation again. Contact the
Xerox Welcome Center if the problem persists.
035-701 Unable to communicate due to an incorrect phone number. Check the phone
number, and perform the same operation again.
If DP (Dial Pulse) is used for G3, check that "∗" and "#" are not included in the
phone number.
035-702
035-703
The other party cancelled the transmission. Ask the other party to check their
machine status, and resend the document if necessary.
Code Description and Remedy
Downloaded From ManualsPrinter.com Manuals

Xerox WorkCentre 7132 Specifications

General

Brand	Xerox
Model	WorkCentre 7132
Category	All in One Printer
Language	English