Xerox WorkCentre 7132

Job Assembly
Xerox WorkCentre 7132 User Guide 83
• Both Sides - Deletes on both sides.
• Side 1 Only - Deletes from Side 1 only.
• Side 2 Only - Deletes from Side 2 only.
[Delete Outside/Delete Inside - Area ×] screen
Allows you to specify the area for the [Delete Outside/Delete Inside] feature. The area
is defined by the rectangle formed between the points X1,Y1 and X2,Y2.
1. Select [Area ×] on the [Delete
Outside/Delete Inside] screen.
2. Enter a value for each
coordinate using the numeric
keypad, and select [Next].
3. Select [Save].
Downloaded From ManualsPrinter.com Manuals