Agilent Technologies 4156C Command Reference

5-56 Agilent 4155C/4156C SCPI Command Reference, Edition 1
SCPI Commands
:HCOPy:PAGE:FDIRection
:HCOPy:PAGE:FDIRection
This command sets the direction of the paper-feed into the plotter.
At *RST, the value of this parameter is SSIDe.
Syntax :HCOPy:PAGE:FDIRection SSIDe | LSIDe
Parameter
Query response SSID | LSID <newline><^END>
Example OUTPUT @Hp4155;":HCOP:PAGE:FDIR SSID"
OUTPUT @Hp4155;":HCOP:PAGE:FDIR?"
ENTER @Hp4155;A$
:HCOPy:PAGE:LENGth
This command sets the vertical length of the paper.
Unit of length is set by :HCOPy:PAGE:UNIT command.
At *RST, the value of this parameter is set to 11 inch.
Syntax :HCOPy:PAGE:LENGth length | MINimum | MAXimum
Parameter
Query response length <newline><^END>
The data type of length is NR3 response data.
Parameter Type Explanation
SSIDe character Direction is shorter side of the paper
LSIDe character Direction is longer side of the paper
Parameter
Explanati
on
length numeric vertical length of the paper
7to20(inch)or177.793to507.98(mm)

Agilent Technologies 4156C Specifications

General

Brand	Agilent Technologies
Model	4156C
Category	Measuring Instruments
Language	English