Agilent Technologies 4156C Command Reference

Agilent 4155C/4156C SCPI Command Reference, Edition 1 5-189
SCPI Commands
:PAGE:MEASure:QSCV:CNAMe
:PAGE:MEASure:QSCV:CNAMe
This command sets the variable name of the measurement result data for the
Quasi-static CV measurements. The variable is available only for the Quasi-static
CV measurement mode. This command also has a query form.
At *RST, this value is set to CAP.
Syntax :PAGE:MEASure:QSCV:CNAMe name
:PAGE:MEASure:QSCV:CNAMe?
Parameter
Query response name <newline><^END>
Example OUTPUT @Hp4155;":PAGE:MEAS:QSCV:CNAME 'CDATA'"
OUTPUT @Hp4155;":PAGE:MEAS:QSCV:CNAME?"
ENTER @Hp4155;A$
Parameter Type Explanation
name string String of up to 6 alphanumeric characters.
The first character must be an alpha character.

Agilent Technologies 4156C Specifications

General

Brand	Agilent Technologies
Model	4156C
Category	Measuring Instruments
Language	English