Agilent Technologies 4156C Command Reference

5-6 Agilent 4155C/4156C SCPI Command Reference, Edition 1
SCPI Commands
:CALibration:AUTO
:CALibration:AUTO
This command sets whether the instrument automatically performs calibration every
30 minutes.
At *RST, this value is set to OFF.
Syntax :CALibration: AUTO OFF | ON | 0 | 1
Parameter
Query response 0 | 1 <newline><^END>
Example OUTPUT @Hp4155;":CAL:AUTO ON"
OUTPUT @Hp4155;":CAL:AUTO?"
ENTER @Hp4155;A
Parameter Type Explanation
OFF or 0 boolean Do not perform auto calibration
ON or 1 boolean Perform auto calibration

Agilent Technologies 4156C Specifications

General

Brand	Agilent Technologies
Model	4156C
Category	Measuring Instruments
Language	English