Agilent Technologies 4156C Command Reference

Agilent 4155C/4156C SCPI Command Reference, Edition 1 5-5
SCPI Commands
:CALibration[:ALL]?
:CALibration[:ALL]?
This command performs a full calibration of the instrument, then returns a
numeric_value that indicates the result of the calibration.
A zero is returned if calibration is completed successfully. Otherwise, one is
returned.
In addition to the error reported by this query response, the 4155C/4156C still
reports calibration errors through the normal status-reporting mechanism.
This command has query form only.
Syntax :CALibration [ :ALL] ?
Query response result <newline><^END>
The data type of result is NR1 response data.
Example OUTPUT @Hp4155;":CAL?"
ENTER @Hp4155;A
Result Explanation
0PASS
1FAIL

Agilent Technologies 4156C Specifications

General

Brand	Agilent Technologies
Model	4156C
Category	Measuring Instruments
Language	English