Agilent 4155C/4156C SCPI Command Reference, Edition 1 5-269
SCPI Commands
:PAGE:STRess:SETup:FILTer
Parameter
Query response duration <newline><^END>
duration is NR3 response data type.
Example OUTPUT @Hp4155;":PAGE:STR:SET:DUR 10"
OUTPUT @Hp4155;":PAGE:STR:SET:DUR MAX"
OUTPUT @Hp4155;":PAGE:STR:SET:DUR?"
ENTER @Hp4155;A
OUTPUT @Hp4155;":PAGE:STR:SET:DUR? MAX"
ENTER @Hp4155;A
:PAGE:STRess:SETup:FILTer
This command sets the SMU output filter state for stress.
At *RST, this value is OFF.
Syntax :PAGE:STRess:SETup:FILTer OFF | ON | 0 | 1
Parameter
Query response 0 | 1 <newline><^END>
Example OUTPUT @Hp4155;":PAGE:STR:SET:FILT ON"
OUTPUT @Hp4155;":PAGE:STR:SET:FILT?"
ENTER @Hp4155;A
Parameter Type Explanation
duration numeric 0 to 31536000 s (31536000 s is 1 year). 0 means
free run.
Parameter Type Explanation
OFF or 0 boolean filter is turned off.
ON or 1 boolean filter is turned on.
To Next Page
Loading...
Need help?
General
