To Next Page

To Previous Page

5-274 Agilent 4155C/4156C SCPI Command Reference, Edition 1

SCPI Commands

:PAGE:STRess:SETup:PULSe:PGU<n>:LEADing

This command sets the leading-edge transition time (LEADING TIME) of PGU<n>

for stress.

<n> is required to specify PGU number. Valid PGU numbers are PGU1 through

PGU2.

The mode of the specified PGU must be VPULse.

At *RST, this value is 100 ns.

Syntax :PAGE:STRess:SETup:PULSe:PGU<n>:LEADing leading_time | MINimum |

MAXimum

Parameter

Query response leading_time <newline><^END>

leading_time is NR3 response data type.

Example OUTPUT @Hp4155;":PAGE:STR:SET:PULS:PGU1:LEAD 0.001"

OUTPUT @Hp4155;":PAGE:STR:SET:PULS:PGU1:LEAD MAX"

OUTPUT @Hp4155;":PAGE:STR:SET:PULS:PGU1:LEAD?"

ENTER @Hp4155;A

OUTPUT @Hp4155;":PAGE:STR:SET:PULS:PGU1:LEAD? MAX"

ENTER @Hp4155;A

Parameter Type Explanation

leading_time numeric 100E-9 to 10E-3 (s)

Agilent Technologies 4156C Command Reference

Other manuals for Agilent Technologies 4156C