Agilent 4155C/4156C SCPI Command Reference, Edition 1 5-125
SCPI Commands
:PAGE:DISPlay[:SETup]:GRAPhics:X|:Y1|:Y2:DELete
:PAGE:DISPlay[:SETup]:GRAPhics:X|:Y1|:Y2:DELete
This command deletes the assignment of the X, Y1, or Y2 axis.
This command does not have query form.
Syntax :PAGE:DISPlay [ :SETup] :GRAPhics:X|:Y1|:Y2:DELete
Example OUTPUT @Hp4155;":PAGE:DISP:GRAP:X:DEL"
:PAGE:DISPlay[:SETup]:GRAPhics:X|:Y1|:Y2:MAX
This command sets the maximum value of X, Y1, or Y2 axis.
At *RST, this value is:
Syntax :PAGE:DISPlay [ :SETup] :GRAPhics:X|:Y1|:Y2:MAX maximum
Parameter
Query response maximum <newline><^END>
maximum is NR3 response data type.
Example OUTPUT @Hp4155;":PAGE:DISP:GRAP:X:MAX 10"
OUTPUT @Hp4155;":PAGE:DISP:GRAP:X:MAX?"
ENTER @Hp4155;A
AXIS variable name
X1 V
Y1 100 mA
Y2 0
Parameter Type Explanation
maximum numeric maximum value of X, Y1, or Y2 axis
To Next Page
Loading...
