Agilent Technologies 4156C Command Reference

5-306 Agilent 4155C/4156C SCPI Command Reference, Edition 1
SCPI Commands
:SYSTem:COMMunicate:NETwork:FILEr:NET:NAME
:SYSTem:COMMunicate:NETwork:FILEr:NET:NAM
E
This command is one of the commands to register the network drive setup. To
register a setup, the following commands must be entered:
• :SYSTem:COMMunicate:NETwork:FILEr:NET:NAME
• :SYSTem:COMMunicate:NETwork:FILEr:NET:IPADdress
• :SYSTem:COMMunicate:NETwork:FILEr:NET:DIRectory
• :SYSTem:COMMunicate:NETwork:FILEr:SET
You can register maximum 4 setups.
This command sets the label or name for the network drive setup.
If you do not enter the :SYST:COMM:NET:FILE:SET command, *RST clears this
setting. Query returns the present setting.
Syntax :SYSTem:COMMunicate:NETwork:FILEr:NET:NAME name
Parameter
Query response hostname <newline><^END>
Example OUTPUT @Hp4155;":SYST:COMM:NET:FILE:NET:NAME 'mydir1'"
OUTPUT @Hp4155;":SYST:COMM:NET:FILE:NET:NAME?"
ENTER @Hp4155;A$
Parameter Type Explanation
name string Label or name for the network drive setup.
Maximum 15 characters.

Agilent Technologies 4156C Specifications

General

Brand	Agilent Technologies
Model	4156C
Category	Measuring Instruments
Language	English