Agilent Technologies 4156C Command Reference

5-44 Agilent 4155C/4156C SCPI Command Reference, Edition 1
SCPI Commands
:HCOPy:ITEM:FFEed:STATe
:HCOPy:ITEM:FFEed:STATe
This command sets whether the printer or plotter feeds a sheet after plot or print out
by the :HCOPy:IMMediate command or :HCOPy:DATA? query.
At *RST, the value of this parameter is OFF.
Syntax :HCOPy:ITEM:FFEed:STATe OFF | ON | 0 | 1
Parameter
Query response 0 | 1 <newline><^END>
Example OUTPUT @Hp4155;":HCOP:ITEM:FFE:STAT ON"
OUTPUT @Hp4155;":HCOP:ITEM:FFE:STAT?"
ENTER @Hp4155;A
:HCOPy:ITEM:LABel:STATe
This command sets whether the user defined comment for the plot or print out
(PRINT/PLOT COMMENT), which is defined by :HCOPy:ITEM:LABel:TEXT
command, should be plotted or printed when the :HCOPy:IMMediate command or
:HCOPy:DATA? query is sent.
At *RST, the value of this parameter is ON.
Syntax :HCOPy:ITEM:LABel:STATe OFF | ON | 0 | 1
Parameter
Query response 0 | 1 <newline><^END>
Parameter Type Explanation
OFF or 0 boolean Disable form feed function
ON or 1 boolean Enable form feed function
Parameter Type Explanation
OFF or 0 boolean PRINT/PLOT COMMENT is not plotted or printed.
ON or 1 boolean PRINT/PLOT COMMENT is plotted or printed.

Agilent Technologies 4156C Specifications

General

Brand	Agilent Technologies
Model	4156C
Category	Measuring Instruments
Language	English