5-142 Agilent 4155C/4156C SCPI Command Reference, Edition 1
SCPI Commands
:PAGE:GLISt[:GRAPhics]:MARKer:LIMit
value is NR3 response data type.
Example OUTPUT @Hp4155;":PAGE:GLIS:MARK:DIR:X 0.5"
OUTPUT @Hp4155;":PAGE:GLIS:MARK:DIR:X?"
ENTER @Hp4155;A
:PAGE:GLISt[:GRAPhics]:MARKer:LIMit
This command moves the marker to the minimum or maximum Y axis point of
curve.
The search direction is from present to last measurement point, then from first to
present measurement point.
This command does not have query form.
Syntax :PAGE:GLISt [ :GRAPhics] :MARKer:LIMit
Example OUTPUT @Hp4155;":PAGE:GLIS:MARK:LIM"
:PAGE:GLISt[:GRAPhics]:MARKer:SKIP
This command skips the marker to the next measurement curve that was added by
VAR2 variable or APPEND data.
This command does not have query form.
Syntax :PAGE:GLISt [ :GRAPhics] :MARKer:SKIP
Example OUTPUT @Hp4155;":PAGE:GLIS:MARK:SKIP"
To Next Page
Loading...
