Agilent Technologies 4156C Command Reference

5-100 Agilent 4155C/4156C SCPI Command Reference, Edition 1
SCPI Commands
:PAGE:CHANnels:MATrix:CONTROL
:PAGE:CHANnels:MATrix:CONTROL
This command enables, or disables, remote control of the Agilent E5250A Low
Leakage Switch Mainframe. This command also has a query form.
At *RST, this value is OFF.
Execution
Conditions
This command is executable only on the built-in IBASIC controller.
Syntax :PAGE:CHANnels:MATrix:CONTROL OFF | ON | 0 | 1
:PAGE:CHANnels:MATrix:CONTROL?
Parameter
Query response 0 | 1 <newline><^END>
Example OUTPUT @Hp4155;":PAGE:CHAN:MAT:CONTROL 1"
OUTPUT @Hp4155;":PAGE:CHAN:MAT:CONTROL?"
ENTER @Hp4155;A
Parameter Type Explanation
OFF or 0 Boolean The 4155C/4156C cannot control Agilent E5250A.
ON or 1 Boolean The 4155C/4156C can control Agilent E5250A.

Agilent Technologies 4156C Specifications

General

Brand	Agilent Technologies
Model	4156C
Category	Measuring Instruments
Language	English