Agilent Technologies 4156C Command Reference

5-190 Agilent 4155C/4156C SCPI Command Reference, Edition 1
SCPI Commands
:PAGE:MEASure:QSCV:CONStant:SMU<n>:COMPliance
:PAGE:MEASure:QSCV:CONStant:SMU<n>:COMPliance
This command sets the COMPLIANCE value of the source SMU<n> for the
Quasi-static CV measurement. This command also has a query form.
<n> is required to specify the SMU number. Valid SMU numbers are SMU1 through
SMU6, depending on the configuration.
Use this command only if the function of the specified SMU is CONStant and the
mode is not COMMon.
Syntax :PAGE:MEASure:QSCV:CONStant:SMU<n>:COMPliance compliance |
MINimum | MAXimum
:PAGE:MEASure:QSCV:CONStant:SMU<n>:COMPliance?
Parameter
Query response compliance <newline><^END>
compliance is an NR3 response data type.
Example OUTPUT @Hp4155;":PAGE:MEAS:QSCV:CONS:SMU1:COMP 0.1"
OUTPUT @Hp4155;":PAGE:MEAS:QSCV:CONS:SMU1:COMP?"
ENTER @Hp4155;A
Parameter Type Explanation
compliance numeric –200 to 200 V or –1 to 1 A. The range of this
value depends on the SMU type being used.

Agilent Technologies 4156C Specifications

General

Brand	Agilent Technologies
Model	4156C
Category	Measuring Instruments
Language	English