Agilent 4155C/4156C SCPI Command Reference, Edition 1 5-23
SCPI Commands
:DIAG:TEST:RESult?
:DIAG:TEST:RESult?
This query command returns the result of the diagnostic test.
Syntax :DIAG:TEST:RESult?
Query response result <newline><^END>
The data type of result is NR1 response data.
The result values have the following meaning.
Example OUTPUT @Hp4155;":DIAG:TEST 101"
OUTPUT @Hp4155;":DIAG:TEST:RES?"
ENTER @Hp4155;A
result Explanation
-2 Test in progress
-1 Not complete (now pause status waiting to continue)
0PASS
1FAIL
2 DONE
3 NOT DONE
To Next Page
Loading...
