Agilent 4155C/4156C SCPI Command Reference, Edition 1 5-59
SCPI Commands
:HCOPy:PAGE:WIDTh
Parameter
Query response IN | MM <newline><^END>
Example OUTPUT @Hp4155;":HCOP:PAGE:UNIT IN"
OUTPUT @Hp4155;":HCOP:PAGE:UNIT?"
ENTER @Hp4155;A$
See also :HCOPy:PAGE:LENGth, :HCOPy:PAGE:WIDTh
:HCOPy:PAGE:WIDTh
This command sets the horizontal width of the paper.
Unit of width is set by :HCOPy:PAGE:UNIT command.
At *RST, the value of this parameter is set to 8.5 inch.
Syntax :HCOPy:PAGE:WIDTh width
Parameter
Query response width <newline><^END>
The data type of width is NR3 response data.
Example OUTPUT @Hp4155;":HCOP:PAGE:WIDT 10"
OUTPUT @Hp4155;":HCOP:PAGE:WIDT?"
ENTER @Hp4155;A
See also :HCOPy:PAGE:UNIT
Parameter Type Explanation
IN character inch
MM character millimeter
Parameter Type Explanation
width numeric width of the paper
To Next Page
Loading...
