Agilent 4155C/4156C SCPI Command Reference, Edition 1 5-263
SCPI Commands
:PAGE:STRess:FORCe:ACCumulate
:PAGE:STRess:FORCe:ACCumulate
This command resets the accumulated stress time to 0.
Query returns the accumulated stress time.
At *RST, the accumulated stress time is 0.
Syntax :PAGE:STRess:FORCe:ACCumulate RESet
Parameter
Query response accumulate <newline><^END>
accumulate is NR3 response data type.
Example OUTPUT @Hp4155;":PAGE:STR:FORC:ACC RES"
OUTPUT @Hp4155;":PAGE:STR:FORC:ACC?"
ENTER @Hp4155;A
:PAGE:STRess:FORCe[:MENU]
This command changes the present display page to STRESS: STRESS FORCE.
This command does not have query form.
Syntax :PAGE:STRess:FORCe [ :MENU]
Example OUTPUT @Hp4155;":PAGE:STR:FORC"
Parameter Type Explanation
RESet character reset accumulated time to zero
To Next Page
Loading...
Need help?
General
