Agilent Technologies 4156C Command Reference

5-254 Agilent 4155C/4156C SCPI Command Reference, Edition 1
SCPI Commands
:PAGE:STRess[:CDEFinition]:PGU<n>:MODE
:PAGE:STRess[:CDEFinition]:PGU<n>:MODE
This command sets the output MODE of PGU<n> for stress.
<n> is required to specify PGU number. Valid PGU numbers are PGU1 through
PGU2.
At *RST, this value is not defined.
Syntax :PAGE:STRess [ :CDEFinition] :PGU<n>:MODE V | VPULse
Parameter
Query response V | VPUL | DIS <newline><^END>
If PGU is not used, the response data may be DIS (DISable).
Example OUTPUT @Hp4155;":PAGE:STR:PGU1:MODE V"
OUTPUT @Hp4155;":PAGE:STR:PGU1:MODE?"
ENTER @Hp4155;A$
:PAGE:STRess[:CDEFinition]:PGU<n>:NAME
This command sets the NAME of PGU<n> for stress.
<n> is required to specify PGU number. Valid PGU numbers are PGU1 through
PGU2.
At *RST, this value is not defined.
Syntax :PAGE:STRess [ :CDEFinition] :PGU<n>:NAME name
Parameter
Parameter Type Explanation
V character voltage output mode
VPULse character voltage pulse output mode
Parameter Type Explanation
name string String of up to 6 alphanumeric characters.
1st character must be alphabet.

Agilent Technologies 4156C Specifications

General

Brand	Agilent Technologies
Model	4156C
Category	Measuring Instruments
Language	English