Agilent Technologies 4156C Command Reference

Agilent 4155C/4156C SCPI Command Reference, Edition 1 5-203
SCPI Commands
:PAGE:MEASure:QSCV:VAR1:MODE
:PAGE:MEASure:QSCV:VAR1:MODE
This command sets the VAR1 sweep mode for Quasi-static CV measurements. This
command also has a query form.
At *RST, this value is set to SING
Syntax :PAGE:MEASure:QSCV:VAR1:MODE SINGle | DOUBle
:PAGE:MEASure:QSCV:VAR1:MODE?
Parameter
Query response SING | DOUB <newline><^END>
Example OUTPUT @Hp4155;":PAGE:MEAS:QSCV:VAR1:MODE SING"
OUTPUT @Hp4155;":PAGE:MEAS:QSCV:VAR1:MODE?"
ENTER @Hp4155;A$
Parameter Type Explanation
SINGle character Single mode (start to stop)
DOUBle character Double mode (start to stop to start)

Agilent Technologies 4156C Specifications

General

Brand	Agilent Technologies
Model	4156C
Category	Measuring Instruments
Language	English