Agilent Technologies 4156C Command Reference

Agilent 4155C/4156C SCPI Command Reference, Edition 1 5-143
SCPI Commands
:PAGE:GLISt[:GRAPhics]:MARKer[:STATe]
:PAGE:GLISt[:GRAPhics]:MARKer[:STATe]
This command selects whether the marker is on or off.
At *RST, this value is OFF.
Syntax :PAGE:GLISt [ :GRAPhics] :MARKer [ :STATe] OFF | ON | 0 | 1
Parameter
Query response 0 | 1 <newline><^END>
Example OUTPUT @Hp4155;":PAGE:GLIS:MARK ON"
OUTPUT @Hp4155;":PAGE:GLIS:MARK?"
ENTER @Hp4155;A
:PAGE:GLISt[:GRAPhics][:MENU]
This command changes the present display page to GRAPH/LIST: GRAPHICS.
This command does not have query form.
Syntax :PAGE:GLISt [ :GRAPhics] [ :MENU]
Example OUTPUT @Hp4155;":PAGE:GLIS"
:PAGE:GLISt[:GRAPhics]:SCALing:AUTO
This command redraws the present graphic display with appropriate scale to plot the
data in the plotting area.
This command does not have query form.
Syntax :PAGE:GLISt [ :GRAPhics] :SCALing:AUTO ONCE
Example OUTPUT @Hp4155;":PAGE:GLIS:SCAL:AUTO ONCE"
Parameter Type Explanation
OFF or 0 boolean marker is off
ON or 1 boolean marker is on

Agilent Technologies 4156C Specifications

General

Brand	Agilent Technologies
Model	4156C
Category	Measuring Instruments
Language	English