5-62 Agilent 4155C/4156C SCPI Command Reference, Edition 1
SCPI Commands
MMEMory Subsystem
The MMEMory (Mass MEMory) subsystem provides mass storage capabilities.
You can select one from the available mass memory devices: internal memory,
built-in flexible disk drive and file system on your NFS server. But the internal
memory is a restricted mass memory device, which has only four fixed names
(MEM1, MEM2, MEM3, MEM4) and their file extensions for data type (MES, STR, DAT
or MAT).
The following table is a command tree of MMEMory subsystem.
Command Parameter
:MMEMory
:CATalog? [<msus>]
:CDIRectory <dir_name> [,<msus>]
:COPY <file_name>, <file_name> | <file_name>,
<msus>, <file_name>, <msus>
:DELete file_name [,msus]
:DESTination INTernal | NET1 | NET2 | NET3 | NET4
:INITialize {LIF | DOS}
:LOAD
:STATe <state_no>, <file_name> [,<msus>]
:TRACe <label>, <file_name> [,<msus>]
:MOVE <file_name>, <file_name> | <file_name>,
<msus>, <file_name>, <msus>
:NAME <file_name> [,<msus>]
:STORe
:SSHeet <file_name>
:DELimiter SPACe | TAB | COMMa
:LINDex <numeric>, <numeric>
:SMARK NONE | DQUote | SQUote
:UNIT OFF | ON | 0 | 1
:STATe <state_no>, <file_name> [,<msus>]
:TRACe <label>, <file_name> [,<msus>]
To Next Page
Loading...
Need help?
General
