Agilent 4155C/4156C SCPI Command Reference, Edition 1 6-11
Error Messages
Device-Dependent Error
Device-Dependent Error
-3XX errors indicate that the 4155C/4156C has detected an error that is not a
command error, a query error, or an execution error; some device operations did not
properly complete, possibly due to an abnormal hardware or firmware condition.
These codes are also used for self-test response errors.
Error -300 Device-specific error
Generic device-dependent error for the 4155C/4156C that cannot be determined
more specifically.
Error -310 System error
Some error, termed "system error" by the 4155C/4156C, has occurred.
Error -311 Memory error
An error was detected in the 4155C/4156C's memory.
Error -313 Calibration memory lost
Nonvolatile data saved by the *CAL? command has been lost.
Error -315 Configuration memory lost
Nonvolatile configuration data saved by the 4155C/4156C has been lost.
Error -330 Self-test failed
The self-test has failed.
Error -350 Queue overflow
This code is entered into the queue instead of the code that caused the error. This
code indicates that there is no room in the queue and an error occurred but was not
recorded.
To Next Page
Loading...
Need help?
General
