Agilent Technologies 4156C Command Reference

5-156 Agilent 4155C/4156C SCPI Command Reference, Edition 1
SCPI Commands
:PAGE:KSWeep:VAR1:POLarity
:PAGE:KSWeep:VAR1:POLarity
This command sets the polarity of VAR1 sweep area for knob sweep measurement.
At *RST, this value is POSitive.
Syntax :PAGE:KSWeep:VAR1:POLarity POSitive | NEGative | BIPolar
Parameter
Query response POS | NEG | BIP <newline><^END>
Example OUTPUT @Hp4155;":PAGE:KSW:VAR1:POL POS"
OUTPUT @Hp4155;":PAGE:KSW:VAR1:POL?"
ENTER @Hp4155;A$
:PAGE:KSWeep:VAR1:RANGe
This command sets the range of VAR1 for knob sweep measurement.
At *RST, this value is 1 V.
Syntax :PAGE:KSWeep:VAR1:RANGe range
Parameter
Query response range <newline><^END>
range is NR3 response data.
Example OUTPUT @Hp4155;":PAGE:KSW:VAR1:RANG 1"
OUTPUT @Hp4155;":PAGE:KSW:VAR1:RANG?"
ENTER @Hp4155;A
Parameter Type Explanation
POSitive character sweep in positive X direction
NEGative character sweep in negative X direction
BIPolar character sweep in positive and negative X directions
Parameter Type Explanation
range numeric 0.1 V to 200 V, or 1E-9 A to 1 A

Agilent Technologies 4156C Specifications

General

Brand	Agilent Technologies
Model	4156C
Category	Measuring Instruments
Language	English