Agilent 4155C/4156C SCPI Command Reference, Edition 1 5-327
SCPI Commands
:SYSTem:SSAVer
:SYSTem:SSAVer
This command sets the time until the screen saver works.
*RST sets this parameter to 30 minutes. Query returns the present setting.
Syntax :SYSTem:SSAVer minute
Parameter
Query response minute <newline><^END>
minute is NR1 response data.
Example OUTPUT @Hp4155;":SYST:SSAV 10"
OUTPUT @Hp4155;":SYST:SSAV?"
ENTER @Hp4155;A
Parameter Type Explanation
minute numeric Time until the screen saver works. 0 to 60 minutes
in 1 minute step. 0 disables the screen saver.
To Next Page
Loading...
