Agilent Technologies 4156C

Agilent 4155C/4156C SCPI Command Reference, Edition 1 5-135
SCPI Commands
:PAGE:GLISt[:GRAPhics]:DISPlay:DVARiables
:PAGE:GLISt[:GRAPhics]:DISPlay:DVARiables
This command selects whether the variables specified in the DATA VARIABLES
fields of the DISPLAY: DISPLAY SETUP will be displayed on the graph or list.
At *RST, this value is OFF.
Syntax :PAGE:GLISt [ :GRAPhics] :DISPlay:DVARiables OFF | ON | 0 | 1
Parameter
Query response 0 | 1 <newline><^END>
Example OUTPUT @Hp4155;":PAGE:GLIS:DISP:DVAR ON"
OUTPUT @Hp4155;":PAGE:GLIS:DISP:DVAR?"
ENTER @Hp4155;A
:PAGE:GLISt[:GRAPhics]:DISPlay:OVERlay:STOVer
lay
This command forces the scale of the present measurement data to that of the
overlay plane.
This command does not have query form.
Syntax :PAGE:GLISt [ :GRAPhics] :DISPlay:OVERlay:STOVerlay
Example OUTPUT @Hp4155;":PAGE:GLIS:DISP:OVER:STOV"
Parameter Type Explanation
OFF or 0 boolean variable list is off
ON or 1 boolean variable list is on