Agilent Technologies 4156C Command Reference

Agilent 4155C/4156C SCPI Command Reference, Edition 1 4-11
Common Commands
*PCB
*PCB
This command is used to tell a potential controller which address should be used
when passing control back.
This command does not have query form.
Syntax *PCB address{ ,second_address}
Parameter
Parameter Type Explanation
address numeric 0 to 30
second_address numeric 0 to 30

Agilent Technologies 4156C Specifications

General

Brand	Agilent Technologies
Model	4156C
Category	Measuring Instruments
Language	English