Agilent 4155C/4156C SCPI Command Reference, Edition 1 5-215
SCPI Commands
:PAGE:MEASure:SAMPling:SCONdition:ECOunt
Example OUTPUT @Hp4155;":PAGE:MEAS:SAMP:POIN 5"
OUTPUT @Hp4155;":PAGE:MEAS:SAMP:POIN MAX"
OUTPUT @Hp4155;":PAGE:MEAS:SAMP:POIN?"
ENTER @Hp4155;A
OUTPUT @Hp4155;":PAGE:MEAS:SAMP:POIN? MAX"
ENTER @Hp4155;A
:PAGE:MEASure:SAMPling:SCONdition:ECOunt
This command sets the number of EVENT occurrences for the stop condition.
Sampling measurement continues until EVENT occurs the specified number of times
(event_number).
Syntax :PAGE:MEASure:SAMPling:SCONdition:ECOunt event_number | MINimum |
MAXimum
Parameter
Query response event_number <newline><^END>
event_number is NR1 response data type.
Example OUTPUT @Hp4155;":PAGE:MEAS:SAMP:SCON:ECO 10"
OUTPUT @Hp4155;":PAGE:MEAS:SAMP:SCON:ECO?"
ENTER @Hp4155;A
Parameter Type Explanation
event_number numeric 1 to 200
To Next Page
Loading...
