5-60 Agilent 4155C/4156C SCPI Command Reference, Edition 1
SCPI Commands
:HCOPy:SDUMp:DATA?
:HCOPy:SDUMp:DATA?
This command returns hardcopy (PCL or HP-GL) data of the current screen image.
This command has query form only.
Syntax :HCOPy:SDUMp:DATA?
Query response #0{data element} <newline><^END>
Response is in indefinite length arbitrary block response data format.
Example Refer to Programmer's Guide
:HCOPy:SDUMp[:IMMediate]
This command plots or prints out the current screen image.
This command does not have query form.
Syntax :HCOPy:SDUMp [ :IMMediate]
Example OUTPUT @Hp4155;":HCOP:SDUM"
To Next Page
Loading...
