Agilent 4155C/4156C SCPI Command Reference, Edition 1 5-313
SCPI Commands
:SYSTem:COMMunicate:NETwork:PRINter:NET:TYPE
:SYSTem:COMMunicate:NETwork:PRINter:NET:TY
PE
This command is one of the commands to register the network printer setup. To
register a printer setup, the following commands must be entered:
• :SYSTem:COMMunicate:NETwork:PRINter:NET:NAME
• :SYSTem:COMMunicate:NETwork:PRINter:NET:IPADdress
• :SYSTem:COMMunicate:NETwork:PRINter:NET:TEXToption
• :SYSTem:COMMunicate:NETwork:PRINter:NET:GRAPhoption
• :SYSTem:COMMunicate:NETwork:PRINter:NET:TYPE
• :SYSTem:COMMunicate:NETwork:PRINter:SET
You can register maximum 4 setups.
This command sets the type of the print server (BSD or System V).
If you do not enter the :SYST:COMM:NET:PRIN:SET command, *RST clears this
setting. Query returns the present setting.
Syntax :SYSTem:COMMunicate:NETwork:PRINter:NET:TYPE BSD | SYSV
Parameter
Query response BSD | SYSV <newline><^END>
Example OUTPUT @Hp4155;":SYST:COMM:NET:PRIN:NET:TYPE BSD"
OUTPUT @Hp4155;":SYST:COMM:NET:PRIN:NET:TYPE?"
ENTER @Hp4155;A$
Parameter Type Explanation
BSD character BSD format
SYSV character System V format
To Next Page
Loading...
