Agilent 4155C/4156C SCPI Command Reference, Edition 1 5-297
SCPI Commands
:STATus:QUEStionable:ENABle
:STATus:QUEStionable:ENABle
This command sets the event enable (MASK) for the Questionable Status "EVENT"
register. 1 enables a bit, and 0 disables a bit.
Enabled "EVENT" bits are ORed together, then reported to Bit3 of the Status Byte
Register.
Syntax :STATus:QUEStionable:ENABle register
Parameter
Query response register <newline><^END>
register is a decimal integer value, which is the sum of the binary-weighted values,
in NR1 response data format.
Example OUTPUT @Hp4155;":STAT:QUES:ENAB 16384"
OUTPUT @Hp4155;":STAT:QUES:ENAB #H4000"
OUTPUT @Hp4155;":STAT:QUES:ENAB #Q40000"
OUTPUT @Hp4155;":STAT:QUES:ENAB #B100000000000000"
OUTPUT @Hp4155;":STAT:QUES:ENAB?"
ENTER @Hp4155;A
:STATus:QUEStionable[:EVENt]?
This command returns the present status of the Questionable Status "EVENT"
register. Reading this register clears it. This command has query form only.
Syntax :STATus:QUEStionable [ :EVENt] ?
Query response register <newline><^END>
register is a decimal integer value, which is the sum of the binary-weighted values,
in NR1 response data format.
Example OUTPUT @Hp4155;":STAT:QUES?"
ENTER @Hp4155;A
Parameter Type Explanation
register numeric or
non-decim
al numeric
decimal integer, hexadecimal, octal, or binary value
that is the sum of the binary-weighted values for the
desired bits.
To Next Page
Loading...
