Agilent Technologies 4156C Command Reference

5-264 Agilent 4155C/4156C SCPI Command Reference, Edition 1
SCPI Commands
:PAGE:STRess:FORCe:STATus
:PAGE:STRess:FORCe:STATus
This command resets the stress status (time and percent) to zero.
Query returns the stress time forced and percent completion of the stress duration
setting.
At *RST, stress time and percent are 0.
Syntax :PAGE:STRess:FORCe:STATus RESet
Parameter
Query response time, rate <newline><^END>
time and rate are NR3 response data type.
Example OUTPUT @Hp4155;":PAGE:STR:FORC:STAT RES"
OUTPUT @Hp4155;":PAGE:STR:FORC:STAT?"
ENTER @Hp4155;A,B
:PAGE:STRess:SETup:ACCumulate
This command sets the amount of stress that has already been forced to the device.
At *RST, this value is 0.
Syntax :PAGE:STRess:SETup:ACCumulate RESet | accumulate
Parameter
Query response accumulate <newline><^END>
accumulate is NR3 response data type.
Parameter Type Explanation
RESet character reset the status to zero
Parameter Type Explanation
RESet character reset accumulated time to zero
accumulate numeric 0 and above

Agilent Technologies 4156C Specifications

General

Brand	Agilent Technologies
Model	4156C
Category	Measuring Instruments
Language	English