Agilent Technologies 4156C Command Reference

Agilent 4155C/4156C SCPI Command Reference, Edition 1 5-145
SCPI Commands
:PAGE:GLISt[:GRAPhics]:SCALing:ZOOM
:PAGE:GLISt[:GRAPhics]:SCALing:ZOOM
This command zooms the graphic display around the present cursor position.
This command does not have query form.
Syntax :PAGE:GLISt [ :GRAPhics] :SCALing:ZOOM IN | OUT
Parameter
Example OUTPUT @Hp4155;":PAGE:GLIS:SCAL:ZOOM IN"
:PAGE:GLISt:LIST:ASELect
This command selects whether the Y axis of GRAPHICS page is Y1 or Y2 and
changes the setting by :PAGE:GLISt[:GRAPhics]:ASELect.
You use this command when you would like to assign data variables, which uses
line parameters of graphics, on list.
At *RST, this value is Y1.
Syntax :PAGE:GLISt:LIST:ASELect Y1 | Y2
Parameter
Query response Y1 | Y2 <newline><^END>
Example OUTPUT @Hp4155;":PAGE:GLISt:LIST:ASEL Y1"
OUTPUT @Hp4155;":PAGE:GLISt:LIST:ASEL?"
ENTER @Hp4155;A$
Parameter Type Explanation
IN character zoom in
OUT character zoom out
Parameter Type Explanation
Y1 character y axis is Y1
Y2 character y axis is Y2

Agilent Technologies 4156C Specifications

General

Brand	Agilent Technologies
Model	4156C
Category	Measuring Instruments
Language	English