Agilent 4155C/4156C SCPI Command Reference, Edition 1 5-95
SCPI Commands
:PAGE:CHANnels[:CDEFinition]:VMU<n>:DISable
:PAGE:CHANnels[:CDEFinition]:VMU<n>:DISable
This command deletes the settings of VMU<n>.
<n> is required to specify VMU number. Valid VMU numbers are VMU1 through
VMU2.
This command does not have query form.
Syntax :PAGE:CHANnels [ :CDEFinition] :VMU<n>:DISable
Example OUTPUT @Hp4155;":PAGE:CHAN:VMU1:DIS"
:PAGE:CHANnels[:CDEFinition]:VMU<n>:MODE
This command sets the MODE of VMU<n>.
<n> is required to specify VMU number. Valid VMU numbers are VMU1 through
VMU2.
At *RST, this value is V.
Syntax :PAGE:CHANnels [ :CDEFinition] :VMU<n>:MODE V | DVOLt
Parameter
Query response V | DVOL | DIS <newline><^END>
If VMU is not used, the response data may be DIS(DISable).
Example OUTPUT @Hp4155;":PAGE:CHAN:VMU1:MODE V"
OUTPUT @Hp4155;":PAGE:CHAN:VMU1:MODE?"
ENTER @Hp4155;A$
Parameter Type Explanation
V character voltage measurement mode
DVOLt character differential voltage measurement mode
To Next Page
Loading...
