Agilent Technologies 4156C Command Reference

5-144 Agilent 4155C/4156C SCPI Command Reference, Edition 1
SCPI Commands
:PAGE:GLISt[:GRAPhics]:SCALing:CANCel
:PAGE:GLISt[:GRAPhics]:SCALing:CANCel
This command redraws the plotting area with the "original settings".
"Original settings" means the most recent settings of the DISPLAY: DISPLAY
SETUP page or RE-SETUP GRAPH secondary softkey.
This command does not have query form.
Syntax :PAGE:GLISt [ :GRAPhics] :SCALing:CANCel
Example OUTPUT @Hp4155;":PAGE:GLIS:SCAL:CANC"
:PAGE:GLISt[:GRAPhics]:SCALing:CENTer
This command redraws the graphic display so that it is centered around the present
cursor position.
This command does not have query form.
Syntax :PAGE:GLISt [ :GRAPhics] :SCALing:CENTer
Example OUTPUT @Hp4155;":PAGE:GLIS:SCAL:CENT"
:PAGE:GLISt[:GRAPhics]:SCALing:CTMarker
This command moves the cursor to the marker's position.
This command does not have query form.
Syntax :PAGE:GLISt [ :GRAPhics] :SCALing:CTMarker
Example OUTPUT @Hp4155;":PAGE:GLIS:SCAL:CTM"

Agilent Technologies 4156C Specifications

General

Brand	Agilent Technologies
Model	4156C
Category	Measuring Instruments
Language	English