Agilent Technologies 4156C

5-134 Agilent 4155C/4156C SCPI Command Reference, Edition 1
SCPI Commands
:PAGE:GLISt[:GRAPhics]:CURSor[:STATe]
At *RST, this value is undefined.
Syntax :PAGE:GLISt [ :GRAPhics] :CURSor:DIRect:X|:Y1|:Y2 value
Parameter
Query response value <newline><^END>
value is NR3 response data type.
Example OUTPUT @Hp4155;":PAGE:GLIS:CURS:DIR:X 0.5"
OUTPUT @Hp4155;":PAGE:GLIS:CURS:DIR:X?"
ENTER @Hp4155;A
:PAGE:GLISt[:GRAPhics]:CURSor[:STATe]
This command sets the state of cursor.
At *RST, this value is OFF.
Syntax :PAGE:GLISt [ :GRAPhics] :CURSor [ :STATe] OFF | SHORt | LONG
Parameter
Query response OFF | SHORt | LONG <newline><^END>
Example OUTPUT @Hp4155;":PAGE:GLIS:CURS LONG"
OUTPUT @Hp4155;":PAGE:GLIS:CURS?"
ENTER @Hp4155;A$
Parameter Type Explanation
value numeric x, y1, or y2 coordinate value
Parameter Type Explanation
OFF character cursor is off
SHORt character short cursor is on
LONG character long cursor is on