Agilent Technologies 4156C Command Reference

Agilent 4155C/4156C SCPI Command Reference, Edition 1 5-325
SCPI Commands
:SYSTem:LANGuage
:SYSTem:LANGuage
This command performs reset, then switches the remote command language from
the 4155/4156 (SCPI) to the 4145B syntax commands mode.
After switching the language to the 4145B syntax commands mode, only the *RST
command can switch the language back to SCPI mode.
This command does not have query form.
At *RST, the remote command language is SCPI.
Syntax :SYSTem:LANGuage COMPatibility
Parameter
Example OUTPUT @Hp4155;":SYST:LANG COMP"
:SYSTem:LFRequency
This command sets or queries the value that is set for the power line frequency
(reference frequency). *RST has no effect on the value of this parameter.
Syntax :SYSTem:LFRequency frequency
Parameter
''HZ'' suffix can be used after frequency.
Query response frequency <newline><^END>
frequency is NR3 response data.
Example OUTPUT @Hp4155;":SYST:LFR 50"
OUTPUT @Hp4155;":SYST:LFR 50HZ"
Parameter Type Explanation
COMPatibility character 4145B syntax commands
Parameter Type Explanation
frequency numeric 50 or 60 (Hz)

Agilent Technologies 4156C Specifications

General

Brand	Agilent Technologies
Model	4156C
Category	Measuring Instruments
Language	English