Agilent 4155C/4156C SCPI Command Reference, Edition 1 5-283
SCPI Commands
To comply with SCPI, the following :EXPLicit subsystem is also implemented for
the 4155C/4156C.
The function of :EXPLicit subsystem commands is same as corresponding above
commands of :SELected subsystem.
The following table is the command tree of PROGram subsystem.
Command Parameter
:PROGram
:EXPLicit
:DEFine "PROG", <program>
:DELete "PROG"
:EXECute "PROG"
:MALLocate "PROG", <nbytes> | DEFault
:NUMBer "PROG", <varname> {,<nvalues>}
:STATe "PROG", RUN | PAUSe | STOP | CONTinue
:STRing "PROG", <varname> {,<svalues>}
:WAIT "PROG"
To Next Page
Loading...
Need help?
General
