107
To Change Other Drum Map Settings
You can open the Drum Map Manager from either a MIDI track’s Output menu, or
with the Options-Drum Map Manager command.
Change map settings in the Drum Map Manager as described in the following
table:
When you are happy with the drum sounds you have mapped, you can mixdown to
an audio file. For more information, see “Converting MIDI to Audio” on page 429.
For more information about drum maps and editing drum tracks in the Piano Roll
view, see Chapter 8, Drum Maps and the Drum Grid Pane.
That’s the end of Tutorial 9. For more information, see “Working with Software
Synthesizer” on page 399.
To do this… Do this…
Add a row (a mapped pitch) Click the Add New Drum Map Entry button
.
Change In Note value Double-click in the appropriate cell and enter
a new value, or click on the right side of the
cell, and when the cursor changes to an up
and down arrow, drag it up to increase the
value or down to lower the value.
Change the Name setting Double click on the appropriate cell and enter
a new name.
Change the Channel setting Click the appropriate channel cell’s down
arrow and select a channel from the menu that
appears.
Change the Out Port setting Click the appropriate Out Port cell’s down
arrow and select an output port from the menu
that appears.
Change the Vel+ setting Double-click in the appropriate cell and enter
a new value, or click on the right side of the
cell, and when the cursor changes to an up
and down arrow, drag it up to increase the
value or down to lower the value.
Change the V Scale setting Double-click in the appropriate cell and enter
a new value, or click on the right side of the
cell, and when the cursor changes to an up
and down arrow, drag it up to increase the
value or down to lower the value.
To Next Page
Loading...