447
To Choose What Band You’re Controlling When Only One Band
is Showing
• Click the Band menu that’s at the bottom of the EQ display, and choose the
band number you want to control.
To Enable or Disable the EQ
• Click the Enable/Disable button that’s next to the Band menu: .
To Choose the Filter Type for Each Band
• Click the filter type menu that’s just above the Band menu, and choose a filter
type.
To Enable or Disable a Band
• Click the Enable/Disable button that’s on the left side of the band type menu.
To Set Frequency, Gain, and Q for Each Band
• In the band that you want to configure, drag the frequency slider (f icon), gain
slider (triangle icon), or Q slider (Q icon), respectively, to the left or right. The
value is displayed just to the right of each icon, and the plot (graph) changes
as you drag.
To Hide or Show the Plot (Graph)
• Click the Plot button.
To Open the EQ Interface
• Double-click the Plot.
Applying Audio Effects
You can destructively apply audio effects for one or more tracks. When you are
pleased with the audio effects you have patched into a track, you can apply the
effects to the track. Applying effects to a track saves resources, allowing you to
include additional tracks and/or effects.
Note:
When applied effects are undone, they are not re-patched in the
Effects bin(s).
To Next Page
Loading...