503
To Delete Several or All Envelopes
1. Select the data that contains the envelopes you want to delete—you can select
parts of tracks, one or more whole tracks, or all tracks.
2. Use the Edit-Cut command to open the Cut dialog box.
3. Select Track/Bus Automation if it’s listed.
4. Select Clip Automation if it’s listed.
5. Click OK.
SONAR deletes any track and clip envelopes that are in the data you selected.
Copying and Pasting Envelopes
You can copy and paste envelopes or parts of envelopes between tracks and clips.
You can not, however, copy and paste a clip envelope without also copying and
pasting the audio or MIDI data that is in that clip. If you paste a clip envelope into
a track without the clip that it came from, the clip envelope becomes a track
envelope.
To Copy an Envelope
1. In the Track view or the Clips pane, select the track or clip that has the
envelope you want to copy. If you want to copy all the automation data in the
track, select the whole track. If you want to select only a clip, but want to
select any track envelopes in that track, click the dropdown arrow next to the
Select tool , and make sure that the Select Track Envelopes With
Selected Clips option has a checkmark next to it.
2. Press Ctrl+C or use the Edit-Copy command.
The Copy dialog box appears.
3. Choose Clip Automation and/or Track/Bus Automation.
Note: If the Track/Bus Automation field is greyed-out, you must re-select a
part of the clip that contains either a node or a solid line (shape). A dotted line
by itself is not an envelope and can not be copied.
4. Choose any other kinds of data you want to copy—if you only want to copy the
automation data, choose only Track/Bus Automation and/or Clip Automation.
5. Click OK.
SONAR copies the data you selected to the clipboard.
To Next Page
Loading...