109
To Import Files to the Loop Bin
1. Click the Load Files button in the Loop Bin.
The Open dialog appears.
2. Open the Tutorials folder located in the directory where you installed SONAR.
3. In the Tutorials folder select 100FX.
WAV and click Open.
The loop 100FX.
WAV appears in the Loop bin and the Loop view.
To Drag Files from the Loop Bin to a Pad Group
• Click on 100FX in the Loop bin and drag it onto pad 2.
To Drag Files from Loop Explorer to the Loop Bin
1. Select View-Loop Explorer.
2. In the Loop Explorer, navigate to the Tutorials folder located in the directory
where you installed SONAR.
3. Click and drag the loop 100ONETWO.WAV onto pad 3.
4. Click and drag the loop 100
ORGAN.WAV onto pad 4.
Click the Preview button to listen to the song so far.
Now let’s make some changes.
Setting a Pad’s Volume and Pan
Now let’s tweak some of the pad groups’ controls.
To Change the Volume and Pan in a Pad Group
1. In pad group two, click on the Volume knob and drag your mouse down to
lower the volume until the volume level indicator is vertical.
2. Repeat step 1 for the Volume knob in pad group 3.
3. In pad group two click the Pan knob and drag the mouse up until it is panned
hard left.
4. In pad group four, click the Pan knob and drag the mouse down until it is
panned hard right.
Click Play to hear all the pad groups together.
Now let’s explore the different ways you can use Cyclone.
To Next Page
Loading...