CAKEWALK SONAR - The Console View

38
:
The Console View
The Console view is where you can mix the sounds on all the different tracks to
create the final mix of your project. While the Track view provides most of the
same controls, you may want to use the more familiar interface of the Console view
for mixing.
You use the Console view to adjust the levels of sound for the different tracks in
your project, to change the stereo panning, and to apply real-time effects to an
individual track, combinations of tracks, or the final mix.
The Console view contains several groups of controls. There is one module for each
track in your project, and one module for each bus. You can use bus sends to direct
certain tracks to special modules that are known as buses.
Narrow the Track Inspector Right-click a blank area and choose Narrow
Strip from the popup menu.
Bypass the FX bin Right-click the FX bin and choose Bypass Bin
from the popup menu.