CAKEWALK SONAR - Changing Mapped-Note Settings

343
Changing Mapped-note Settings
You can change the following settings in the Note Map pane:
• Mapped-note name
•Note Out
•Mute
•Solo
To Change the Name Setting
The name of a mapped note in the Note Map pane is a user-assigned variable.
Make it descriptive for easy reference. To change the Name setting, use the
following procedure:
1. In the Note Map pane, double-click on the appropriate row.
The Map Properties dialog appears.
2. In the Map Properties dialog, enter a new name in the Name field and press
the Enter key.
To Change the Note Out Setting
The Note Out setting is the actual note you hear when the Note In value is played.
To change the Note Out setting, use the following procedure:
1. In the Note Map pane, double-click on the appropriate row.
The Map Properties dialog appears.
2. In the Map Properties dialog, enter a new value in the Note Out field and
press the Enter key, or use the +/- buttons to change the value and press the
Enter key.
To Change Multiple Note Out Settings
1. Open the Drum Map Manager.
2. In the Drum Map Manager, select a contiguous range of rows by selecting the
first in the range, and holding down the Shift key while selecting the last in
the range.
Or
Select a non-contiguous range by selecting one row and holding down the Ctrl
key while selecting additional rows.
3. Hold down both the Ctrl and Shift keys while selecting a new Output in the
Output column.