208
Copying Tracks
When you copy a track using the Track-Clone command, you can choose any of
the following options:
•Events
• Properties
• Effects
• Link to Original Clip(s)
By default, SONAR copies the entire track to the next blank track, which is
usually below the last track in the Track view. For more information on linked
clips, see “Working with Linked Clips” on page 228.
To Copy a Track
1. Select a track. You can only clone one track at a time.
2. Choose Track-Clone to display the Clone dialog box.
3. Check the Events, Properties, and/or Effects boxes to indicate which items you
want to copy.
4. Click OK.
SONAR copies the entire track to the next blank track, which is usually below the
last track in the Track view.
Erasing Tracks
You can easily delete an entire track, including all of the track properties and all of
its clips and events. Sometimes, you only want to erase, or wipe, the contents of a
track, leaving the track properties as they are. If you delete or wipe a track by
mistake, you can use Edit-Undo to restore the deleted material.
When you delete or wipe a track, the track information is not placed on the
SONAR clipboard. To remove material from a track and place it on the clipboard,
use the Edit-Cut command instead.
To Delete Tracks
1. Select the tracks you want to delete.
2. Choose Track-Delete.
SONAR deletes the selected tracks. You can also right-click individual tracks and
choose Delete Track from the popup menu.
To Wipe Tracks
1. Select the tracks you want to wipe.
2. Choose Track-Wipe.
SONAR deletes all clips and events from the selected tracks, but leaves the track
properties intact.
To Next Page
Loading...