644
When I Play a File Containing Audio, the
Audio Portion Doesn’t Play
Open a bundle file (.CWB) and click the Play button. Do you hear the audio tracks
in the project (there may be MIDI tracks in the bundle file, so you must mute
them). If not, try the following:
If none of these suggestions works, check our web site for additional suggestions or
contact technical support.
Possible problem… What to do…
Your speakers aren’t connected properly,
or the volume is turned down.
Make sure your speakers are
connected properly and the volume is
turned up.
Your sound card isn’t hooked up correctly. Run the Microsoft Sound Recorder
(Start-Programs-Accessories-
Multimedia-Sound Recorder). Open
any wave file and see if it plays sound
correctly through your speakers. If not,
check your sound card documentation
to make sure the card is properly
installed and configured.
The volume setting is turned down on your
software mixer.
Double-click on the yellow speaker
icon in the Windows task bar to display
the mixer, and make sure all the
volume settings are turned up and that
none are muted.
Your audio tracks are assigned to the
wrong output.
Check the output assignment for your
audio tracks in the Track pane.
SONAR doesn’t recognize your sound
card.
Choose Options-Audio, click the
General tab, and then click the Wave
Profiler button to test your audio
hardware. Then, re-open the bundle
file and try again.
To Next Page
Loading...